脫氧柱

在工業氧的測定分析中，現使用國標GB/T 3863-1995《工業氧的測定分析法》中采用的是銅氨溶液吸收氧，根據吸收后殘氣體積，計算 氧的含量，但存在分析操作復雜、準確性差、不適合大空分裝置液氧中氧氣濃度測定等問題。

氧和氬的物理性質相近，在色譜柱上較難分離，得到的色譜峰通常是一混合組分，而無 法定量，因此氧氬分離成為色譜分離中一大的難題。在國標GB/T 14605-93《氧氣中微量氬、 氮和氪的測定氣相色譜法》中是采用脫氧柱(401脫氧劑)先將氧脫除，而后使被檢測組分氬、 氮和氪經色譜柱分離后進入檢測器，達到測定分析氬、氮等組分的
脫氧柱 圖片：




401 deoxygenation column
401 deoxygenation column Detailed information:

Specifications: 3m*3mm, 3m*1/8, 3m*4mm
Model: 401
Application: Removal of trace O2 in gas separation

In the determination and analysis of industrial oxygen, the national standard GB/T 3863-1995 "Industrial Oxygen Determination and Analysis Method" is used to absorb oxygen in a copper ammonia solution, and the oxygen content is calculated according to the residual gas volume after absorption, but there is an analysis. The operation is complicated, the accuracy is poor, and it is not suitable for the determination of the oxygen concentration in the liquid oxygen of the large air separation device.
Oxygen and argon have similar physical properties and are difficult to separate on the column. The obtained peak is usually a mixed component and cannot be quantified. Therefore, oxygen-argon separation is a major problem in chromatographic separation. In the national standard GB/T 14605-93 "Determination of Trace Argon, Nitrogen and Helium in Oxygen Gas Chromatography", the deoxidation column (401 deoxidizer) is used to remove oxygen first, and then the detected components are argon, nitrogen and helium. After separation by the chromatographic column, it enters the detector to achieve the purpose of measuring and analyzing components such as argon and nitrogen.


401 deoxygenation column