TDX-01填充柱測定 耐硫一氧化碳變換催化劑

耐硫一氧化碳變換催化劑，液化石油氣，二甲醚，甲縮醛，乙縮醛，苯系物，消毒劑，增塑劑，塑化劑，乙酸乙酯，醫療器械，環氧乙烷，二叔丁基過氧化物，三甲胺，二甲醚，乙縮醛

耐硫一氧化碳變換催化劑
耐硫一氧化碳變換催化劑 詳細信息：

名稱：填充柱

規格：2m*1/8

型號：TDX-01

應用：HG T 2780-2016 一氧化碳耐硫變換催化劑及其低壓活性試驗方法(2016)

耐硫一氧化碳變換催化劑及其制備方法，涉及一種一氧化碳變換催化劑。提供一種既適合在高壓高汽氣比，又能在低壓低汽氣比的寬操作條件下應用的耐硫一氧化碳變換催化劑及其制備方法?；钚猿煞钟梢訫oO表示的Mo的化合物、以CoO表示的Co的化合物和以KO表示的K的化合物組成，載體為鎂鋁尖晶石MgAl。按輕質MgO與氧化鋁摩爾比為1∶1稱取輕質MgO和多孔性含水無定形氧化鋁置于混捏機中，加入硝酸的水溶液混合和捏壓，形成可塑體，擠條成型后干燥，烘干，焙燒得多孔性MgAl載體。將鉀鹽、鈷鹽、鉬酸銨和絡合穩定劑用水溶解，用氨水調節溶液pH，用所配制的混合溶液浸漬計量的MgAl載體，干燥。


浩瀚色譜（山東）應用技術開發有限公司采用TDX-01填充柱測定耐硫一氧化碳變換催化劑中原料氣，柱效高，分離好，結果滿意。

耐硫一氧化碳變換催化劑 測試譜圖：






Sulfur-tolerant carbon monoxide shift catalyst
Sulfur-tolerant carbon monoxide shift catalyst Details:

Name: Packed column

Specification: 2m*1/8

Model: TDX-01

Application: HG T 2780-2016 carbon monoxide sulfur tolerant shift catalyst and its low pressure activity test method (2016)





A sulfur-tolerant carbon monoxide shift catalyst and a preparation method thereof relate to a carbon monoxide shift catalyst. Provided is a sulfur-tolerant carbon monoxide shift catalyst suitable for application under wide operating conditions of high pressure and high steam-to-gas ratio as well as low pressure and low steam-to-gas ratio and a preparation method thereof. The active ingredient is composed of a Mo compound represented by MoO, a Co compound represented by CoO, and a K compound represented by KO, and the carrier is magnesium aluminum spinel MgAl. Weigh light MgO and porous hydrated amorphous alumina according to the molar ratio of light MgO to alumina of 1:1, place them in a kneader, add an aqueous solution of nitric acid, mix and knead to form a plastic body, and dry after extrusion. , Drying and calcining to obtain porous MgAl carrier. Dissolve potassium salt, cobalt salt, ammonium molybdate and complex stabilizer in water, adjust the pH of the solution with ammonia water, impregnate the metered MgAl carrier with the prepared mixed solution, and dry.


Haohan Chromatography (Shandong) Applied Technology Development Co., Ltd. uses TDX-01 packed column to determine the feed gas in the sulfur-tolerant carbon monoxide shift catalyst. The column efficiency is high, the separation is good, and the results are satisfactory.

Test spectrum of sulfur-tolerant carbon monoxide shift catalyst: