PEG-20M毛細管柱測定 高分子材料浸提液中環氧乙烷遷移量

高分子材料浸提液中環氧乙烷遷移量 ，液化石油氣，二甲醚，甲縮醛，乙縮醛，乙醇，室內空氣，焦爐煤氣，煉廠氣，天然氣，變壓器油，多氯聯苯，植物油，增塑劑，過氧化物，增塑劑，甲縮醛

高分子材料浸提液中環氧乙烷遷移量
高分子材料浸提液中環氧乙烷遷移量 詳細信息：

名稱：毛細管柱
規格：30m*0.32mm*0.5um
型號：PEG-20M
應用：植入性醫療器械 高分子材料 浸提液中有毒有害物質的測定第 10 部分：環氧乙烷遷移量 氣相色譜法



高分子材料浸提液中環氧乙烷遷移量 測試譜圖：




Migration of ethylene oxide in polymer material extract
Migration amount of ethylene oxide in polymer material extracting solution Details:

Name: Capillary Column
Specification: 30m*0.32mm*0.5um
Model: PEG-20M
Application: Implantable medical devices, Polymer materials, Determination of toxic and hazardous substances in extracts. Part 10: Migration of ethylene oxide, Gas chromatography

1 Scope
This standard specifies the gas chromatography of ethylene oxide migration in polymer material extracts of implantable medical devices sterilized by ethylene oxide
Method of determination.
This standard applies to the determination of the migration of ethylene oxide in polymer material extracts of implantable medical devices sterilized by ethylene oxide.
The detection limit of ethylene oxide in this method is 0.1 mg/L.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document.
GB/T 6682 Analytical laboratory water specifications and experimental methods
GB/T 16886.12 Biological evaluation of Medical Devices Part 12: Sample Preparation and Reference Materials
3 Principles of the method
Place the sample to be tested in a closed container, and heat it up to make the volatile components volatilize from the sample matrix.
When the phases reach equilibrium, the gas in the headspace is directly extracted for gas chromatographic analysis. Qualitative by retention time, quantification by peak area, using external standard
Quantitative


Test spectrum of ethylene oxide migration in polymer material extract: